Whether this is your first repair or your tenth, Short Pump Electrical Company is the call you make when you want the job handled correctly. We work with homeowners and commercial clients across Short Pump, Henrico County, and the surrounding communities, covering everything from a single dead outlet to a full-service panel upgrade. Residential or commercial, straightforward or complex, we take on the full range of electrical work this area calls for.
We are a local electrician for homeowners who want clear answers and work they can count on. You're talking to someone who knows the area and the homes in it. When you call, you reach someone who can speak to the work directly, scope the job on the phone, and tell you what to expect before anything is scheduled.
Pick the date. We do the wiring. We clean up after.
Electrical problems don't wait, and neither do we, which is why repair and troubleshooting calls are handled promptly across Short Pump and Henrico County. The symptoms that send people searching are usually the same ones: a light that flickers without explanation, an outlet that stopped working, a breaker that keeps tripping, a burning smell near a wall plate, or an outlet that feels warm to the touch. Any of those signals something worth diagnosing before it becomes something bigger.
A diagnostic visit covers the symptom and the source. We trace the fault back through the circuit, check the wiring connections, test the breaker, and look at what the load on that circuit is actually doing. Where GFCI or AFCI protection is part of the picture, we test those devices and replace them when they have failed or were never installed where the code now requires them. Sparking outlets, partial power loss to one side of the home, and circuits that reset only to trip again all get the same methodical approach: find the cause, not just the symptom.
No pressure and no gimmicks, just safe, solid wiring and a clear explanation of what we found and what it takes to fix it. We'll trace it, fix it, and test it before we leave.
Electrical problems don't wait, and neither do we, and that is especially true when the panel itself is the problem. Older panels and fuse boxes were built for the loads of a different era. A home that has added a home office, a second refrigerator, an electric dryer, or an EV charger is asking more of its electrical service than the original installation was designed to handle. When breakers trip under normal use, when fuses blow repeatedly, or when a fuse box is still in place where a modern breaker panel belongs, an upgrade is the right answer.
A panel upgrade involves a load calculation to confirm the service size the home actually needs, replacement of the panel and breakers, and proper grounding and bonding at the new equipment. A service-entrance upgrade, when the utility feed itself needs to increase from 100 amps to 200 amps, follows the same process with the additional step of coordinating the utility connection. Subpanel installation for a detached garage, workshop, or addition follows the same principles: right-sized wire, correct breaker capacity, proper grounding.
Permit requirements vary by jurisdiction and by the scope of the work. We confirm what applies to your address before the job is scheduled. The scope of the electrical work is priced before it starts, so you know what the job covers when you book it. Let us handle the panel and the permits.
A flickering light and a full rewire start the same way: with a look at what the wiring is actually doing. In Short Pump and the older neighborhoods of Henrico County, that sometimes means finding knob-and-tube wiring that was never updated, or aluminum branch-circuit wiring that needs remediation before it can be safely extended. Both are common in homes of a certain age, and both have straightforward solutions when the work is done correctly.
Whole-home rewiring replaces aging or unsafe wiring with code-compliant copper, run to current standards and inspected before the walls close. Partial rewires cover a specific area or set of circuits without touching the rest of the home. Either way, the work is scoped before it starts.
On the installation side, we handle:
We get to the bottom of the problem fast, whether that means swapping a single outlet or pulling new wire through an entire floor.
Some appliances and equipment need their own circuit, separate from the shared branch circuits that run the rest of the home. A dryer, an electric range, a refrigerator in a finished basement, a chest freezer, a hot tub disconnect, or a sump pump all benefit from a dedicated circuit that keeps their load off everything else. We run the wire, install the correct outlet or disconnect, and confirm the panel has the capacity to support it before the work starts.
EV charger installation is one of the most common dedicated-circuit requests in this area. A Level 2 home EV charging station runs on a 240-volt circuit, typically 40 to 50 amps, and requires a circuit that does not exist in most homes until it is installed. We assess the panel, confirm the available capacity, run the circuit to the garage or driveway location, and install the outlet or hardwired connection the charger requires. If the panel needs additional capacity to support the charger, that work is scoped and priced at the same time.
Whole-home surge protection installs at the main panel and intercepts voltage spikes before they reach the wiring and devices in the home. A single surge event can damage appliances, electronics, and HVAC equipment without tripping a single breaker. A panel-mounted surge protector is a one-time installation that covers every circuit in the home from that point forward. Call now and we'll get the power back where it belongs.
Seeing flickering lights or a warm outlet? Those are the kinds of faults an electrical safety inspection is designed to catch before they become something more serious. An inspection covers the panel, the branch circuits, the outlets, the grounding system, and the visible wiring. It is useful for buyers and sellers before a real estate transaction, for owners of older homes who have not had the wiring reviewed in years, and for anyone who has recently had renovation work done and wants confirmation that the electrical side was handled correctly. We also install hardwired smoke detectors and carbon monoxide detectors during inspection visits when replacements or new installations are needed.
Generator hookups connect a portable or standby generator to the home through a transfer switch. The transfer switch is the critical piece: it isolates the home from the utility feed before the generator comes online, which protects both the equipment and the utility workers on the line. We install manual and automatic transfer switches, run the circuit from the panel to the connection point, and confirm the load is within what the generator is rated to handle. The scope of that work, including the panel connection and any wiring needed, is confirmed before the job is scheduled. We'll trace it, fix it, and test it before we leave.
For residential and commercial electrical work alike, the approach is the same: understand what the job involves, price it before it starts, and do it correctly. Commercial clients in Short Pump and across Henrico County include property managers, office tenants, and retail operators who need electrical work handled without disruption to their operations.
Commercial repair calls cover the same range of faults as residential work: dead circuits, tripping breakers, outlets that have failed, and lighting that is not functioning correctly. Commercial panel upgrades follow the same load-calculation process, scaled to the service size a commercial space requires. Commercial lighting installation covers office and retail spaces, including LED retrofits, recessed lighting, and exterior lighting for parking areas and building perimeters.
We schedule around the needs of the space, and the scope of the work is confirmed before anyone arrives on site. Call us to discuss what the job involves and what it covers.
Whether this is your first repair or your tenth, the process is the same. You call, describe what is happening or what you need, and we scope the job on the phone. Common questions, such as what a panel upgrade costs, what it takes to install a Level 2 EV charger, what rewiring a floor of the home involves, or what a ceiling fan installation runs, all get a straight answer based on what the job actually requires.
No-pressure estimates, priced up front. The price is confirmed before we schedule the visit, so you know what the work covers before anyone arrives. If the scope changes once we are on site, that conversation happens before the work changes, not after.
We work every day from 8:00 AM to 9:30 PM. Short-notice calls are welcome, and urgent electrical faults are answered within those hours. Ask what the schedule allows when you call.
Pick the date. We do the wiring. We clean up after.
The work is carried out locally, across Short Pump, Henrico County, and the communities nearby. If you are in Glen Allen, Goochland, Mechanicsville, Ashland, Midlothian, or Richmond, we cover your area. The same services available in Short Pump are available across this region, from a single outlet repair to a full panel upgrade or EV charger installation.
We are available every day from 8:00 AM to 9:30 PM. Electrical faults that need attention quickly are answered within those hours, and scheduling a routine job is handled on the same call. Call to confirm coverage at your address and ask what the schedule has available.
Short Pump and the surrounding parts of Henrico County include homes from several different eras, and each era comes with its own wiring patterns. Older homes in the area sometimes carry knob-and-tube or aluminum branch-circuit wiring, and panels from the 1980s and 1990s are often undersized for the loads modern households place on them. We see these situations regularly and know what they involve.
The symptom points to a category of problem, but the cause depends on the specific wiring, the panel, the age of the home, and what loads are on the circuit. A breaker that keeps tripping can mean an overloaded circuit, a failing breaker, a wiring fault, or a combination of all three. We trace the fault to the actual cause rather than replacing parts until something works.
The work follows the current code, the circuit is tested before we leave, and the work area is left clean. Permits are pulled where required, and the scope is explained before any work begins. A job done correctly does not need to be revisited because something was skipped or undersized.
The process is the same regardless of size: scope the job on the call, confirm the price, complete the work, and test it. A single outlet swap takes less time than a panel upgrade, but both get the same diagnostic approach and the same code-compliant installation. Neither gets treated as too small to do correctly.
Yes. We cover Short Pump, Henrico County, and the surrounding area, including Glen Allen, Goochland, Mechanicsville, Ashland, Midlothian, Richmond, and Chesterfield.
If you are not sure whether your address falls within our service area, call (804) 494-5692 and we will confirm directly.
The more specific you can be, the better. Note where in the home the problem is, what you were doing when it happened, whether it is isolated to one outlet or circuit or affecting more of the home, and whether there are any smells, sounds, or visible signs like discoloration around an outlet or switch. That detail helps us scope the job accurately on the call.
Short Pump Electrical Company handles electrical work across Short Pump, Henrico County, and the surrounding area, every day from 8:00 AM to 9:30 PM. Whether you need a repair diagnosed, a panel upgraded, an EV charger installed, or a full rewire scoped, the call is the place to start.
Call (804) 494-5692 and get the scope and the price before anything is scheduled.
Ready for your wiring. Call now.
(804) 494-5692